The standard height of an overhead cabinet is 30 inches, but 36-inch or 42-inch tall cabinets are available to allow you to extend the cabinets to the ceiling to maximize storage space. Upper cabinet widths are sized in 3-inch increments from 9 to 48 inches.
People also ask, how wide is a kitchen counter?
A linear foot is 12 inches wide and 25 inches deep because the standard depth of kitchen countertops is 25 inches. Finally, if your heart is set on granite but your wallet is stuck on laminate, you're in luck.
How wide is a standard dishwasher?
Even so, take precise measurements of height, width and depth before going shopping: While the standard size dishwasher is about 24 inches wide, 24 inches deep and 35 inches high (with adjustable-height legs), those are approximate dimensions.
Standard wall cabinet depth is 12 inches for manufacturers working in inches and 30cm for manufacturers working in metric measurements. Standard wall cabinet widths mirror the widths available for base cabinets ie 12, 15, 18, 24, 30, 36 inches and 30, 40, 50, 60, 80cm. These can vary by manufacturer.
The reason for this is that 18 inches of clearance between base cabinets and uppers are regarded as the optimal working space, and with base cabinets generally 36 inches high (with countertop included) and 24 inches deep, upper cabinets beginning at 54 inches provides the desired 18-inch clearance.
Most Common Stove Size. The most common stove width is 30 inches, and most stoves are 36 inches high so they are flush with the standard kitchen counter height. The standard stove depth is 25 inches, but oven door handles often add a few inches.
In general, base kitchen cabinets are 24 inches deep and 36 inches high. They sit directly on the floor or rest upon a 4-inch toe kick riser. Their width can vary depending on what's sitting on top of them: sinks, cooktops or countertops. Wall cabinets are usually 24 inches high and 12 to 16 inches deep.
A linear foot is 12 inches wide and 25 inches deep because the standard depth of kitchen countertops is 25 inches.
Measure the height of the base cabinets. Most standard cabinets are 34-1/2” high. Add 1-1/2” for a standard countertop and 18 inches for a standard backsplash, (though some designers now want a 20-inch backsplash to make room for small appliances).
The most common standard width for units is 600mm, but standard carcasses are sold in widths of 300mm, 400mm, 500mm, 800mm and 1,000mm. Cabinets up to 600mm have a single door, whilst the larger sizes have two doors. Vertical dimensions vary, but work surfaces areusually fitted at a height of 910mm.
Measure Your Kitchen
- Ensure accuracy. You'll need a tape measure, straight edge and graph paper.
- Measure clockwise. Record the overall length of each wall, working to your right around the room.
- Get the width and height. Take horizontal measurements of walls at 36-inch height.
- Find your center.
- Include the trim.
In a small kitchen, hang doors so they swing out, rather than in, to avoid clearance problems. Passageways through the kitchen should be at least 36 inches wide. In work areas, walkways should be at least 42 inches wide for one cook or 48 inches for multiple cooks.
This leaves a distance of around eighteen inches (18") between the thirty six inch (36") high standard counter top and the bottom of the upper. If you are using thirty inch high wall cabinets, this puts the top of the cupboards at eight four (84") off of the floor.
The typical side-by-side refrigerator measures between 30 and 36 inches in width, 67 and 70 inches in height and from 29 to 35 inches in depth. Total volume ranges from 22.5 to 31 cubic feet, with 14.5 to 20 cubic feet in the refrigerator portion.
Size. The interior width of the sink's cabinet determines the maximum dimensions for your sink. Most base cabinets are 36 to 42 inches high and 25-1/4 to 26 inches wide. A typical 33-by-22-inch sink will fill a 36-inch base cabinet.
= Total Square Feet: Measure each countertop section and record the length and depth dimensions of the sections (in inches, rounded to the nearest inch). Add all the sections (1-8) together to calculate the total square inches. Divide the total square inches by 144 to get the total square feet.
Yes, standard kitchen counters are 36" off the floor, but depending on countertop thickness and standard cabinet heights, this overall height can vary from 35 1/2" to 37" Bar height is 39"- 42", as shown on the bar in this picture.
Measuring A Dresser
- Height: The vertical measurement of the cabinet- from floor to top.
- Depth: The front to back of the unit.
- Width: From one side of the cabinet to the other.
- Follow House of Home: Email | Instagram | Facebook | YouTube | Pinterest.
36 inches is a recommended standard height. Seating at a 36-inch-high island is somewhere between a typical kitchen table seat and typical bar stools. Some professionals recommend 42 inches for an island that will be used mainly for seating/eating.
Kitchen table heights vary, but the standard table height of a kitchen table is 30 inches. Countertop height tables are typically 36 inches and bar height tables (often called pub tables) generally run around 42 inches.
Counter Depth: The standard is 24". But again, this can vary based on your size, appliance depths, and details of the backsplash and cabinetry. Upper Cabinet/Shelving Clearance: The distance from the countertop to the upper cabinets or shelves should be 15 - 20".
Counter height stool seats range from 24-29 inches from the floor and are perfect for kitchen counters or tables that are about 34-39 inches high. A bar stool seat is about 30-36 inches from the ground and is perfect for counters or bars that are 40-46 inches from the ground.