1st October 2018

quora

What is a 4x MSAA?

Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games.

Likewise, what is a Bluetooth HCI?

L2CAP is used within the Bluetooth protocol stack. It passes packets to either the Host Controller Interface (HCI) or on a hostless system, directly to the Link Manager/ACL link. L2CAP's functions include: Multiplexing data between different higher layer protocols.

What is Btsnoop HCI log?

The HCI log file is now being generated and is saved to /sdcard/btsnoop_hci.log. Note: Samsung devices have a slightly different location for the btsnoop file. There are two options for retrieving the HCI log from the Android device. The debug bridge is included with Android Software Developer Kit.

What is Bluetooth trace log?

DBus saves its debug information to this log file which can be useful to tell if both of the parties are able to communicate. HCI trace. In general the term “HCI trace” refers to the sniffed communication between the Bluetooth host (which means the software stack) and the Bluetooth controller (which means the chip).

What is Msaa graphics?

Multisample anti-aliasing (MSAA) is a type of spatial anti-aliasing, a technique used in computer graphics to improve image quality.

Where are the developer options?

How to enable Developer options in Android

If using stock Android, go to Settings > About phone > Build number. On a Samsung Galaxy device, go to Settings > About device > Build number.
Tap Build number seven times.
Go back to Settings, where you'll find a Developer options entry in the menu.

How do I turn on USB debugging?

Navigate to Settings > About Phone > scroll to the bottom > tap Build number seven (7) times. You'll get a short pop-up in the lower area of your display saying that you're now a developer. 2. Go back and now access the Developer options menu, check 'USB debugging' and click OK on the prompt.

How do I take my phone out of developer mode?

Turn off Developer Options

From any Home screen, tap Apps.
Tap Settings.
Tap Developer options.
Slide the Developer options switch right to the ON or left to the OFF position.

What can you do when your Chromebook is in developer mode?

Developer mode is a special function built into Chromebooks which helps keep them secure whilst also allowing users and developers to access the code behind the Operating System and load their own builds of ChromeOS. You can find out more about it on the Chromium Project web site here.

How do I turn off developer?

Disabling Developer Mode Option in Settings. You could toggle the “On“/”Off” switch at the top of the “Settings” > “Developer mode” screen if you wanted to turn it off. If you want to remove the entire option from the “Settings” menu, there is no way to do so without performing a factory reset on the device.

How do I get to developer options?

Here's how to get them back:

Go to the settings menu, and scroll down to "About phone." Tap it.
Scroll down to the bottom again, where you see "Build number." (Your build number may vary from ours here.)
Tap it seven (7) times.

What does dev mode on Xbox one do?

Also, to help developers get those new apps ready in the Store, Microsoft is introducing the new Dev Mode, which turns any retail Xbox One console into a development kit. The mode is in a preview, but the company expects to have a final release in time for the roll out.

What is Samsung developer mode?

Developer Options. To unhide the Developer options menu, touch Apps > Settings > General > About device. Scroll to and touch Build number seven times. The menu option will then appear under Settings > General > Developer options.

How do I enable developer mode in Chrome?

To put your Chromebook in Developer Mode:

Press and hold the Esc and Refresh keys together, then press the Power button (while still holding the other two keys).
As soon as you see Recovery Mode pop up—the screen with the yellow exclamation point—press Ctrl+D.
Press Enter to continue, then give it some time.

How do I turn off developer mode?

To disable and hide "Developer option" from settings menu

Go to Settings (the main settings of your phone).
Under the "Device" heading you will find "Apps".
Move to the "All" apps tab.
Scroll below to find and click on the app that says "Settings".
Click on the button that says "Clear data".

How do you turn off developer mode?

To disable and hide "Developer option" from settings menu

Go to Settings (the main settings of your phone).
Under the "Device" heading you will find "Apps".
Move to the "All" apps tab.
Scroll below to find and click on the app that says "Settings".
Click on the button that says "Clear data".

Where is developer options on s6?

Follow the instructions:

Go to Settings → About device.
Tap Build number 7 times.
Go to Settings → Developer options.
In the Settings menu, you can find the Developer options right above About device.
Enable Galaxy S6 Developer options.
In Developer options page, drag the switch to right to turn it on.

What is a developer in Android?

There are many options that allow you to simulate app stresses or enable debugging options. Android Developer Options allow you to enable debugging over USB, capture bug reports on to your Android device, and show CPU usage on screen to measure the impact of your software.

What is Bluetooth snoop log in?

Enable Bluetooth HCI snoop log: Sometimes, a developer (or security specialist) will need to capture and analyze Bluetooth HCI (Host Controller Interface) packets. Enabling this will place them in a file on the device storage (/sdcard/btsnoop_hci.log) for retrieval.

What is a Bluetooth HCI?

What does Btsnoop_hci Log do?

Answered Oct 9, 2017. Bluetooth HCI snoop log: The 'Enable Bluetooth HCI snoop log' allows you to capture and analyze Bluetooth HCI (Host Controller Interface) packets. Enabling this will places them for analysis in a file on the device storage (/sdcard/btsnoop_hci.log) for retrieval.

What is a 4x MSAA?

Write Your Answer

Rate

Similar Asks

Bookmark

Share