What chemicals are used to clean a swimming pool?

What Chemicals are Needed for Pools?
  • TriChlor: 3” tabs, or 1” tabs or sticks.
  • DiChlor: granular.
  • Bromine: 1” tabs.
  • Cyanuric Acid: Liquid or dry chlorine stabilizer.
  • Calcium Hypochlorite: Cal Hypo pool shock is used to quickly sanitize pool water, boost chlorine levels and kill algae.
  • Chlorine Free Shock: Granular potassium monopersulfate (non- chlorine).
A.

What chemicals are needed to open a swimming pool?

To open a pool you will need skimmer, brush, vacuum, water test strips, total alkalinity increaser, pH incraeser or decreaser, chlorine stabilizer, calcium hardness increaser, granular chlorine, algaecide and scale metal and stain control. The first step of opening the pool is removing the cover.
  • What chemicals to put in a pool for the first time?

    Pool Shock is used to kill algae; Algaecide is used to prevent it from growing in the first place. Step 6 - Add Chlorine Tablets: After balancing the water, adding Stain & Scale and Clarifier, filtering the water, shocking the pool and finally adding a dose of algaecide, you are ready for summer.
  • How long do you run a pool pump?

    Swimming pool pumps should be run an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. However, often times swimming pool pump horse power is overrated for their size swimming pool.
  • How long does it take to empty a swimming pool?

    Your pool size will also determine how long it takes. If you're pumping at 30 gallons/minute, or 1,800 gallons/hour, and you have a 25,000 gallon (94,635.3 L) pool, it will take roughly 14 hours to drain the pool.
B.

What chemicals are needed to maintain a pool?

Part 5 Weekly pool maintenance in a nutshell
  • Put chlorine tablets in a pool floating chlorine feeder.
  • Add shock (3 lbs) weekly at night.
  • Test the water again for the pH level.
  • Add algaecide the next morning.
  • Test the pool balance twice a week.
  • Adjust the alkalinity first, then the bromine or chlorine, then the pH.
  • What are the ideal pool chemical levels?

    The following list details the proper water chemistry levels for optimal swimming pool functionality and comfort:
    • pH: 7.4 – 7.6.
    • Chlorine: 1.0 – 3.0 ppm.
    • Total Alkalinity: 80 – 140 ppm.
    • Calcium Hardness: 200 – 400.
    • Cyanuric Acid: 25 – 50 ppm.
    • Total Dissolved Solids: 500 – 5000 ppm.
  • How much chlorine does it take to shock a pool?

    It's a generally accepted notion that 30 ppm of chlorine residual will kill all algae. Assuming that your pool is clean, and you have adjusted the pH, you can now add the granular chlorine to the pool. Most pool shock packages will list directions to add 1 lb. (1 bag) of shock per 10,000 gallons of pool water.
  • How long do you have to wait to swim after putting chlorine in the pool?

    It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
C.

How much shock Do I need to open my pool?

To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine to 10.0 ppm. Depending on your pool, you can use Leslie's Power Powder Plus or Leslie's Chlor Brite. After shocking the pool, run the circulation system for at least 2 hours before adding an algaecide.
  • How long do you run a pool pump?

    Swimming pool pumps should be run an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time. However, often times swimming pool pump horse power is overrated for their size swimming pool.
  • What is shock for the pool made of?

    Lithium pool shock is used at a dosage of 1lb per 12,000 gallons. When shocking your pool, it is best to dissolve the shock into a bucket of water before pouring it in your pool. Clean burning, with no binder residues. Lithium Shock is made of 35% available chlorine, and 29% lithium hypochlorite.
  • How many gallons is my pool?

    Constant Depth Pools: Square or Rectangular. Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

Updated: 24th October 2018

Rate This Answer

3 / 5 based on 2 votes.