Stamped Concrete Patio Price Ranges. The cost of a stamped concrete patio depends on materials and labor, but it will usually cost between $8 and $20 per square foot to install. They can be very attractive without breaking the bank, and cost $12-$18 per square foot.
How thick is stamped concrete overlay?
The overlay mix is usually applied by a gauge rake (a tool with an adjustable depth gauge for achieving a uniform topping thickness) and then imprinted with stamping mats or texturing skins. Overlay thicknesses range from 1/4 to 3/4 inch, depending on the depth of the imprint.
Stamped Concrete Overlays. A stamped overlay offers all the aesthetic benefits of conventional stamped concrete but is applied over existing concrete. If the concrete is in bad shape, with many cracks or severe settlement, resurfacing may not be a viable option.
The cost of stained concrete can vary greatly. For a basic application of a single stain color with sealer and minimal surface prep, most decorative concrete contractors charge between $2 and $4 per square foot. As the complexity of the job rises, so will the price.
Polymer-modified overlays can be applied in layers as thin as a credit card or up to several inches thick without delamination or failure. They adhere well to existing concrete and resist damage from salt, chemicals, UV exposure, freeze-thaw conditions, and abrasion.
According to our concrete slab material estimator, the average minimum cost per square foot of a concrete slab is $1.36 and the maximum is $1.88. By comparison, the price per square foot for a cement slab is $5.50.
The cost of a professionally built pressured-treated wood deck starts at about $15 per square foot, including materials. The cost for an elaborately built deck using costly hardwoods or composite materials can run about $35 per square foot.
The Costs. The minimum price of a basic stamped concrete walkway is $6 per square foot. The maximum cost for a basic stamped concrete walkway is $10 per square foot.
Joints should be 1/4 the thickness of the slab and placed 2 or 3 times the thickness of the slab. For example, a 4 inch (10 cm) deep slab would use joints that are 1 inch (2.5 cm) deep. Those joints should be spaced every 8 to 12 feet (2.4 to 3.6 m). Working with concrete can be very dangerous.
Brick Paver Costs. Brick pavers generally cost 50 cents or more per brick or between $3 and $15 per square foot, but expect higher prices if you choose unusual sizes, rare colors or odd shapes. Some price quotes for brick pavers include: Red brick pavers: $0.50 - $5 per brick.
Paving a typical two-car concrete driveway of 16 feet wide and 38 feet long (610 sq. ft.) without curves or slopes costs $3,040. Therefore, the average cost per square foot amounts to $4.99, although it can be higher if excavation is needed.
Stamped concrete is concrete that is patterned and/or textured or embossed to resemble brick, slate, flagstone, stone, tile, wood, and various other patterns and textures. Stamped concrete is commonly used for patios, sidewalks, driveways, pool decks, and interior flooring.
Stamped concrete maintenance tips: Although a sealer will inhibit stains, you should still sweep and wash the surface occasionally to avoid dirt buildup. Exterior surfaces can be pressure washed or scrubbed with a mild detergent.
A sealer will keep water from sinking into your concrete. Water should bead up on the surface of the concrete if your sealer is doing its job. In summary, a sealer will enhance and protect your new or existing stamped concrete. When properly sealed and/or resealed the service life of concrete is greatly extended.
You can get similar performance by using an epoxy or urethane system, which generally lasts 5 to 10 years depending on traffic exposure. Acrylic-resin sealers offer the shortest performance life - generally 1 to 3 years. Concrete is locally made and can last for many decades with proper care.
A. It is recommended that you seal your stamped concrete at least every two years. It is not necessary to seal every year. If you begin to notice the color starting to loose its intensity it is time to seal. When applying sealer it is best to apply it in 2 thin coats opposed to one thick coat.
In fact, without proper protection, concrete will not even be that strong or that durable. Just look at cracked sidewalks, crumbling bridges, and leaky foundations if you need further proof. The most cost effective way to protect concrete is to use a concrete sealer as soon as the concrete has finished curing.
Walking: We request you not walk on your concrete for at least 24 hours after the concrete has been finished. Thereafter if it is used or walked on it will scuff and scratch easily for at about 3 days. So avoid dragging your feet and keep pets off for this duration as their nails may scratch or gouge the new concrete.
Curing Time for Concrete. In standard industrial cases, full strength concrete is recognized at 28 days. At seven days, you should have concrete that is cured to 70% full strength or greater. But to answer the question of, “How long does concrete take to set?”, concrete setting time is generally 24 to 48 hours.
Spalling concrete is a common issue for older buildings. It is largely caused by carbonation, a natural deterioration process. This causes the steel bars embedded in the ceiling slab to corrode, which in turn causes the concrete cover to crack and bulge.
If a problem particle is near the surface of the concrete, it can cause a popout (Fig. 8).
- D-cracking is a form of freeze-thaw deterioration that has been.
- Fig. Some aggregates absorb water and, upon freezing,
- expand to produce a popout. ( 0113)
Spalling is a result of water entering brick, concrete or natural stone and forcing the surface to peel, pop out or flake off. In concrete, spalling happens because there is moisture in the concrete. In basements, especially, moisture and often salt, too, pushes outward from the inside.