AnswersDriveExplanation:
- Change the decimal into a fraction by using the decimal number as the numerator and put 1 as the denominator.
- 0.375 1.
- Move the decimal point of the numerator to the right until it becomes a whole number.
- 0.375 → 375 .
Subsequently, one may also ask, what is 4% in a fraction?
Decimal to fraction conversion table
| Decimal | Fraction |
|---|---|
| 0.4 | 2/5 |
| 0.42857143 | 3/7 |
| 0.44444444 | 4/9 |
| 0.5 | 1/2 |
What is 9 percent as a fraction?
Percent to fraction conversion table
| Percent | Fraction |
|---|---|
| 1% | 1/100 |
| 10% | 1/10 |
| 11.11% | 1/9 |
| 12.5% | 1/8 |
1
What is 0.375 as a fraction and percentage?
Decimal to Fraction Chart
| Fraction | Decimal | Percent |
|---|---|---|
| 5/6 | 0.8333 | 83.333% |
| 1/8 | 0.125 | 12.5% |
| 3/8 | 0.375 | 37.5% |
| 5/8 | 0.625 | 62.5% |
2
What is 3 8 of a cup?
Cups
| Cups | Tablespoons | Fluid Ounces |
|---|---|---|
| 1/4 cup | 4 tablespoons | 2 fluid ounces |
| 1/3 cup | 5 tbsp. + 1 tsp. | 2 1/3 fluid ounces |
| 3/8 cup | 1/4 cup + 2 tbsp. | 3 fluid ounces |
| 1/2 cup | 8 tablespoons | 4 fluid ounces |
3
What is half of 3 4?
| ORIGINAL AMOUNT | HALF THE AMOUNT | ONE-THIRD THE AMOUNT |
|---|---|---|
| 3/4 cup | 6 tbsp | 1/4 cup |
| 2/3 cup | 1/3 cup | 3 tbsp + 1-1/2 tsp |
| 1/2 cup | 1/4 cup | 2 tbsp + 2 tsp |
| 1/3 cup | 2 tbsp + 2 tsp | 1 tbsp + 1-1/4 tsp |
4
What is 3 8 in inches?
Decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch
| Inches | |
|---|---|
| fractional | decimal |
| 1/8 | 0.125 |
| 1/4 | 0.250 |
| 3/8 | 0.375 |
5
What is 3 3 8 as a decimal?
Hi, You can express the fraction 3/8 as a decimal by division.Divide 8 into 3 and you get 0.375 not 1.375. I am not sure what you are asking in your second question.
6
What is 3 8 of an inch?
Conversion Table from Inches to Millimeters
| INCHES | MILLIMETERS |
|---|---|
| 23/64 | 9.1281 |
| 3/8 | 9.5250 |
| 25/64 | 9.9219 |
| 13/32 | 10.3188 |
7
What is .3125 as a fraction?
Fraction-to-Decimal Conversion Charts
| Ounces | Fraction | Decimal |
|---|---|---|
| 2 | 1/8 | .125 |
| 3 | 3/16 | .1875 |
| 4 | 1/4 | .25 |
| 5 | 5/16 | .3125 |
8
How do I convert a decimal to a fraction?
Step 1: Write down the decimal divided by 1, like this: decimal 1. Step 2: Multiply both top and bottom by 10 for every number after the decimal point. (For example, if there are two numbers after the decimal point, then use 100, if there are three then use 1000, etc.) Step 3: Simplify (or reduce) the fraction.
9
What is 19 32 in inches?
| mm to Inch Conversion Chart | ||
|---|---|---|
| mm | Inches (approximate) | |
| 15 | 9/16 | 19/32 |
| 16 | 5/8 | 20/32 |
| 17 | 11/16 | 21/32 |
10
What is 7 32 in inches?
Fractional Inches to Decimal Inches and Metric Millimeters
| Inches | Metric | |
|---|---|---|
| Fractional | Decimal | mm |
| 7/32 | 0.2188 | 5.5563 |
| 15/64 | 0.2344 | 5.9531 |
| . | 0.2362 | 6.0000 |
11
How thick is 19 32?
The panel thickness shown is nominal. Use 3/8 for 11/32, ½ for 15/32 and 19/32 for 5/8-inch thickness. Structural 1 plywood in ½-inch thickness is normally available in 4-ply (Southern pine) panel construction because it is less expensive than the 5-ply (Douglas fir).
12
How thick is 23 32 inches?
The most common sizes of plywood sold in the United States are 3/4", 1/2", and 1/4". However, that's not exactly correct. A 3/4" sheet of plywood is really 23/32" (and is now typically labeled as such). Similarly, 1/2" should be correctly labeled as 15/32" and 1/4" labeled as 7/32".
13
What thickness is 15 32?
They don't even seem to agree on the actual thickness of plywood. For example, one bit manufacturer says ½-inch plywood is actually 31/64 inch thick, while another says it's only 15/32 inch thick.
14
How does plywood have so much strength?
The conifers, or softwood plywoods, generally lack the strength of hardwood species. This makes it much stronger over time than hardwood plywood since it will not absorb moisture that causes plywood layers to separate and weaken.
15
How much does a sheet of 3 4 OSB weight?
The weights of osb and plywood are similar: 7/16-inch osb and 1/2-inch plywood weigh in at 46 and 48 pounds. However, 3/4-inch Sturd-I-Floor plywood weighs 70 pounds, 10 pounds less than its osb counterpart.