Lamp Height – A good rule of thumb is to find a table lamp that is approximately 30″ tall from the bottom of the base to the top of the shade/finial. Without getting too mathematical, the top of the lamp should be between 58″ and 64″ from the ground. Measure the height of your table and plan accordingly.
Herein, how do you pick a lampshade for a lamp?
To figure out the right width for your shade, measure your lamp base and multiply by two. For a round base, measure straight across; measure diagonally for a square base. The widest part of your shade should be at least a half-inch wider than the widest part of your base on each side.
Assuming that your nightstand is the same height as your mattress (or within a couple of inches), look for a lamp the same height as your nightstand plus an extra two or three inches. So if your nightstand is 24 inches high, a lamp that is around 27 inches tall will look best.
Side tables typically are 25 to 30 inches tall, and the seat of a sofa usually is about 19 inches from the floor --so consider these measurements when choosing your lamp. Measured from the floor, the top of the lamp should be within 58 to 64 inches.
Height: An ideal height for a living room desk lamp is 26 to 34 inches. Another way to determine if the height of your lamp is just right is by sitting on the sofa or chair next to the lamp. The bottom of the lamp shade should be the same level as your eyes, not higher. Base: Choose a lamp that has a stable base.
Height – Most living room sizes can have table lamps that are 26 to 34 inches tall. When sitting, to get the best use of your table lamp and its light source; the bottom of the shade should be right at eye level as well. Placement - Placement of a table lamp.
So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.
Tables don't have to be identical, but their heights should hit within two inches of each other. The sweet spot for bedside lamps is 24 to 27 inches tall. “You don't want a tiny lamp on a big table or a small table with a towering lamp,” says Griffin.
End tables should be within two inches of a sofa's arm height. For example, if the sofa's arm is 22 inches tall, a proper end table can be anywhere from 20-24 inches tall.The bottom of a lampshade shouldn't fall higher than eyelevel when you're seated on the sofa or chair that's placed next to the lamp.
If your lamp has a harp, you will need a shade with a spider fitter. The spider fitter sits on top of the harp, is secured by a finial, and is integrated in the lampshade. The UNO fitter is built into the lampshade. The Slip type sits on the socket and is held in place by the bulb.
How tall should my floor lamp be? The bottom of the lamp shade should be at eye level when you are sitting down. Generally this would be 38 to 42 inches from the floor if the lamp is beside you and up to 49 inches if the lamp is behind you. Lamp shades 15 inches wide or more supply the most ample light for reading.
The rule of thumb is that its surface area should be equal to or just below the height of the sofa arms. For a standard sofa, that's around 25 inches, but get out the measuring tape to be sure (I did, and it's a good thing — the arms on mine hit 28 inches). Most end tables are between 22 and 30 inches.
A lamp harp is the component of a lamp to which the lamp shade is attached. It typically comes in two separate parts, a saddle which is fastened under the lamp socket, and the harp itself which consist of a lightweight frame attached to the saddle at its lower end and extending upwards to a point above the bulb.
Finials are stylized caps that fit over shades at the top of a lamp. As many lamps have stylized bodies and bases, lamp finials are often necessary to prevent a completed lamp restoration project from having a lopsided or artistically uneven look.
Lamp harps are made from brass or silver. Their 2 legs mount below the lamp socket “saddle” and holds up your lamp shade. Most of our lamp harps include the saddle, but you can generally use the one already installed on your lamp.
Lamps and light fixtures. Some lampshades or light fittings, especially in glass, typically terminate in a finial which also serves to affix the shade to the lamp or fixture. Finials are twisted onto the lamp harp. Typically the finial is externally decorative whilst hiding an internal screw thread.
A lampshade is a fixture that covers the lightbulb on a lamp to diffuse the light it emits. Conical, cylindrical and other forms on floor-, desk- or table top-mounted as well as suspended lamp models are the most common and are made in a wide range of materials.
The first thing you must consider when replacing a glass lampshade is the proper “fitter” size of the shade holder on your lamp or fixture. The shade holder is the part (usually metal) that holds the shade to the lamp or fixture (see “before” picture below).
The lower the Kelvin number (between 2700K to 3000K), the more yellow the light. Higher Kelvin numbers, say 5500K to 6500K, emit a bluer light. For a white light, look for bulbs marked 3500K to 4100K.
Different types of lights or lamps in a lighting system
- Incandescent lamps.
- Compact fluorescent lamps.
- Halogen lamps.
- Metal halide Lamps.
- Light Emitting Diode.
- Fluorescent tube.
- Neon lamps.
- High intensity discharge lamps.
Drum Lamp Shades. Drum-shaped shades are similar to cylinder shades except they are flatter, typically wider than they are tall, similar to a musical drum. On a table lamp the drum shade gives a contemporary, modern look. A drum shade is well suited to a lamp base with wide proportions.