How do I connect my laptop to Canon wireless printer?

Connect to the network printer (Windows).
  1. Open the Control Panel. You can access it from the Start menu.
  2. Select "Devices and Printers" or "View devices and printers".
  3. Click Add a printer.
  4. Select "Add a network, wireless or Bluetooth printer".
  5. Select your network printer from the list of available printers.
A.

What is the WPS button on the printer?

The WPS button is not on the printer. This button would be located on your router itself. If your router does not have a clearly marked 'WPS' button, please use the CD with your computer to perform the standard wireless installation.
  • What is the WPS button on the Canon printer?

    The WPS button is not on the printer. This button would be located on your router itself. If your router does not have a clearly marked 'WPS' button, please use the CD with your computer to perform the standard wireless installation. If additional assistance is needed, feel free to call us at 1-800-OKCANON.
  • What is the WPS button on my Canon printer?

    The WPS button is not on the printer. This button would be located on your router itself. If your router does not have a clearly marked 'WPS' button, please use the CD with your computer to perform the standard wireless installation.
  • What is the access point on a printer?

    An access point or router is a relay device which connects not only the Internet and network devices such as a computer or printer, but also one network device to another.
B.

How do I connect my Canon mg3000 printer to WIFI?

Changing Printer Setting to Use Wireless LAN
  1. Make sure printer is turned on.
  2. Press and hold the Wi-Fi button and release it when the Wi-Fi lamp flashes.
  3. Press the Black button.
  4. Press the Wi-Fi button repeatedly until the Network lamp lights.
  5. Press the Color button or the Black button to finalize selection.
  • How do I connect my Canon mg3150 to WIFI?

    Most WPS enabled access points use this protocol.
    1. Press and hold the [Maintenance] button (A) on the printer for approximately 5 seconds.
    2. Press the [Fit to Page] button (A).
    3. 2. Make sure that the LED ?ashes as shown in the illustration above, then press the [WPS] button on your access point within 2 minutes.
  • How do I connect my Canon mg3520 to WIFI?

    WPS Connection Method
    1. Make sure that the printer is turned on. Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.
    2. Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.
  • How do I connect my Canon mg3200 to WIFI?

    Most WPS enabled access points use this protocol.
    1. Press and hold the [Maintenance] button (A) on the printer for approximately 5 seconds.
    2. Press the [Fit to Page] button (A).
    3. 2. Make sure that the LED ?ashes as shown in the illustration above, then press the [WPS] button on your access point within 2 minutes.

Updated: 26th October 2019

Rate This Answer

3 / 5 based on 3 votes.