24th September 2018

c-ij
8

How do I connect my Canon mg3600 printer to WIFI?

Press and hold the Wi-Fi button (A) on the printer until the ON lamp (B) flashes. Press Black button (C) and then Wi-Fi button (A); make sure Wi-Fi lamp (D) flashes quickly and ON lamp is lit as shown in illustration below, and then press and hold button on wireless router within 2 minutes.

Hereof, how do I reset my Canon mg3600 printer?

Follow the procedure below to disable the wireless LAN.
  1. Make sure machine is turned on.
  2. Press and hold Wi-Fi button and release it when ON lamp flashes.
  3. Press Black button twice and press Wi-Fi button. When the ON lamp changed from flashing to lit and the Wi-Fi lamp goes off, the wireless LAN is disabled.

How do I connect my Canon mg3650 printer to WIFI?

WPS Connection Method
  1. Make sure that the printer is turned on. Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.
  2. Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.

How do I reset my Canon Pixma printer?

Reset Procedure:
  1. Turn ON the printer.
  2. Press and Hold the “Reset button” on the printer.
  3. While pressing the “Reset button“, press and hold the “Color Start” button.
  4. Wait for 5 seconds.
  5. Release the “Color Start” button, and then release the “Reset Button“.
  6. Wait until the printer starts to configure itself.
  7. The no.
Write Your Answer

Rate

76% people found this answer useful, click to cast your vote.

3.8 / 5 based on 5 votes.

Bookmark

Press Ctrl + D to add this site to your favorites!

Share